Youtube Hands-on Upgrade Video for Secondary ESR-9850 AP
This has help the main ESR9850 in the FamilyRoom Basement Network Closet by 22% increased in the signal I was at signal 50% now at 70% in my SOHO/HO. Maybe I should have got the 8dBi for
Hello Guys,
i 've bought the ESR 9850 and i miss some things like...
-WLAN schedule
-WOL feature...
Is there a way to get Wake on Lan runing? In case, pls tell me how.
I've tried to forward broadcast packages to 192.168.1.255, but it's not
Ok from what i understand, it does have a bandwidth monitor but only in firmware 1.09
However even then it's not that great. I suggest Tippy, you ask Engenius to seriously consider adding the bandwith monitor back onto the newer firmwares and make it
Current shot 6/12/2010 in DHCP (main router mode)
Back in April 2010 when I had learned about this router after reading SNB review on it.
I had said, boy I must have this router well indeed such a wireless router made into a wired router giving you
I noticed they have a GPL for it, any chance it will be supported by DD-WRT
Lowest to the Highest Measured
Both are at the same location.
Using the same SMA ANT 5dBi by TP-LINK
Same Wireless Channel 11
Same Mix Mode
Both are in SAPNs (Secondary Access Point Networks)
Note: Grayed out means it's
Original Post from 14 October 2010: (NOP)
Okay, I have an idea. I used 7-Zip to go inside the polaris_update.dat ROM update. I added a Cupcake compatible launcher to the /system/app/ directory. The /data/ folder was empty so I added an /app/ folder and
Direct Source Link
Pictured: above is ESR-9850 initial set-up as the main DHCP router and primary AP, along with Trendnet 16-port 10/100 Switch with 1.5MB Packet Buffer and Trendnet 8-port Copper Gig Green Switch with 144KB Packet Buffer. To the far left was a test going on
Source Link
YouTube™ update for Gen Series
USB Driver/ SD Card Walk-Through
GENTOUCH78 Screen Calibration Update
GENTOUCH78 Factory Reset, Volume Control, Page Back, Home Page...Update
Android OS Kernel Source Code for Gentouch78 Download
There is a firmware update on the Coby USA web site. No info on what is in it or how to install.
Just wondering how it's going for others.
I'm not getting anywhere with it. Just frustrating.
There is a new update for the Archos gen 8, that allows it to run at full speed 1000 MHZ or even slower depending on which power setting you choose.
- Wi-Fi: fix Wi-Fi stuck after a while when using WPA2/AES encryption mode
- Wi-Fi: fix cannot
