Current shot 6/12/2010 in DHCP (main router mode)
Back in April 2010 when I had learned about this router after reading SNB review on it.
I had said, boy I must have this router well indeed such a wireless router made into a wired router giving you
Another testing will be coming up shortly. This will involve scoping the wireless from top to bottom and venturing outdoors in 360 degree radius and 250 feet distance ratio coverage. Wireless laptop or netbook will have on board Xrrius WiFi Inspector,
I noticed they have a GPL for it, any chance it will be supported by DD-WRT
Magnet Mounting
Power On/Off Switch with Multi-function Port (WAN/LAN)
Built-in PSU
closeup
Specs:
WNPU: Ralink RT3052, 384MHz with 32-i cache / 16-d cache, 32MB of RAM, 4MB for FLASH
ANT: 2T/2R (Internal) 2dBi PCB
Ports: 1 Share
Ok from what i understand, it does have a bandwidth monitor but only in firmware 1.09
However even then it's not that great. I suggest Tippy, you ask Engenius to seriously consider adding the bandwith monitor back onto the newer firmwares and make it
Well as I did mention prior I am back and since doing my Flush out the NVRAM before you Ref-flash your Router, which I did with the Russian firmware. I was able to downgrade to 1.21 and finally back to 1.11.
This time around I've slapped on triple 5dBi
Lowest to the Highest Measured
Both are at the same location.
Using the same SMA ANT 5dBi by TP-LINK
Same Wireless Channel 11
Same Mix Mode
Both are in SAPNs (Secondary Access Point Networks)
Note: Grayed out means it's
Firmware 1.09
http://www.filefront.com/16514447/ESR9850-1-0-9-67.rar/
Hi
I have recently purchased what i think is the Gome Flytouch
Memoery Size: 256MB
Model Number: generic
Firmware Version: 1.6
Kernel Version: 2.6.29-00236-gf8dbbb-dirty
BUild Number: WMT2.1.2_105
Is this the latest verion on this
removed video
Sorry for my english. Please, help me.
I`m bay this gadget MID (i`m not understand what the model this MID):
Click this link for view
The seller has assured me that it epad. After purchase I have decided to update on it ROM. But it has turned out so
This is not my Work - Credit to adamdietrick @ xda-developers.com LINK to full Post
Instructions
1. Download and install ClockworkMod .
2: Preparations. If you have not already, install Android SDKto your PC. Download bootimage and system
My android 1.6 flytouch has this terrible thing where if you want to change brightness from the default 100% it will go dark-black. As you can't see anything anymore you have two options from there: either you have the terrible luck to remember where to
